Category: Battery Replacement Instructions – GPS Devices

Garmin Nuvi 760 Battery Installation Instructions

The following Garmin Nuvi 760 Battery Replacement Instruction guide can be used for the following models:

Garmin Nuvi 760 Battery

1. Begin by turning your nuvi 760 face down.

2. On the back near the bottom there will be 2 small screws. Remove those screws with the T4 screw driver provided.

3. Next using the pry tool provided separate the housing case being sure to separate all around the Garmin.

4. Lift up the front portion of the nuvi being careful not to fully separate the two parts as the battery connector and the speaker connector will be attached and connected. Lift just enough to see the battery and the connectors.

(At this point you have 2 options at this point – either disconnect both the speaker wire connector and the battery connector to full separate both halves or simply disconnect the battery cable. You can do whatever is easier for you.)

5. Now disconnect the old battery and remove. There may be some adhesive glue holding down the old battery so you may need to gently pry the old battery up.

6. Insert the new Garmin Nuvi 760 battery. There is only one way to put the new battery in – the red wire will face the top. Now reconnect the battery (and if you disconnected the speaker then reconnect the speaker cable).

7. Now close the housing being careful to not pinch the wires. Click the housing together.

8. Now screw the 2 screws back on place using the T4.

9. Charge your new battery for 4 hours and then turn on to use your Garmin Nuvi 760. 
 PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

Garmin Nuvi 750 Battery Installation Instructions

The following Garmin Nuvi 750 Battery Replacement Instruction guide can be used for the following models:

Garmin Nuvi 750 Battery

1. Begin by turning your nuvi 750 face down.

2. On the back near the bottom there will be 2 small screws. Remove those screws with the T4 screw driver provided.

3. Next using the pry tool provided separate the housing case being sure to separate all around the Garmin.

4. Lift up the front portion of the nuvi being careful not to fully separate the two parts as the battery connector and the speaker connector will be attached and connected. Lift just enough to see the battery and the connectors.

(At this point you have 2 options at this point – either disconnect both the speaker wire connector and the battery connector to full separate both halves or simply disconnect the battery cable. You can do whatever is easier for you.)

5. Now disconnect the old battery and remove. There may be some adhesive glue holding down the old battery so you may need to gently pry the old battery up.

6. Insert the new Garmin Nuvi 750 battery. There is only one way to put the new battery in – the red wire will face the top. Now reconnect the battery (and if you disconnected the speaker then reconnect the speaker cable).

7. Now close the housing being careful to not pinch the wires. Click the housing together.

8. Now screw the 2 screws back on place using the T4.

9. Charge your new battery for 4 hours and then turn on to use your Garmin Nuvi 750.

PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

Garmin Nuvi 360 Battery Installation Instructions

The following Garmin Nuvi 360 Battery Replacement Instruction guide can be used for the following models:

Garmin Nuvi 360 Battery

1. Begin by lifting up your GPS receiver.

2. Then remove the 2 screws on the back of your receiver.

3. Pry open your receiver and locate the black plastic spring at the base of the receiver. Using a sharp object press into the spring cover and press inward on the spring towards the center in order to release the spring that secures the receiver. Remove the spring and unfasten he receiver to reveal 2 screws.

4. Remove the 2 screws that were hidden by the receiver.

5. Now separate the Garmin by prying around your Garmin removing the screen off the back of your Garmin 360.

6. Carefully open the Garmin and detach the yellow ribbon cable near the side of the Garmin. This cable connects to your receiver. Once disconnected you can you can pull the yellow ribbon cable out to make working with the Garmin a little easier.

7. Lift the upper portion of the Garmin to reveal a screw securing the circuit board. Unscrew the screw in order to lift the circuit board.

8. Lift the circuit board and then detach the battery cable from the circuit board.

9. Pry off the original battery replace the battery with a new Garmin Nuvi 360 GPS Battery from Batteryship.com.

10. Connect the new battery to the circuit board.

11. Return the circuit board to its original position and securely fasten the circuit board screw.

12. Return the yellow ribbon cable to its original place and reattach the ribbon cable.

13. Snap the Garmin shut.

14. Replace the 2 screws you removed that were hidden by the receiver.

15. Now return the receiver spring back to the base of the receiver (its original position) and snap the receiver in place.

16. Replace the screws on the back of the receiver and fold down the receiver.

17. Charge your new battery for 4 hours and then turn on to use your Garmin 360.

PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

Garmin Nuvi 200 Battery Installation Instructions

The following Garmin Nuvi 200 Battery Replacement Instruction guide can be used for the following models:

Garmin Nuvi 200 Battery

1. Garmin has hidden the first 2 screws underneath the Nuvi's label. Remove the lable to reveal the 2 screws.

2. Remove the two screws.

3. Using the pry tool sepearte the Garmin nuvi working your way around – this will release the power button cover – remove the button cover.

4. Remove the three screws securing the circuit board.

5. Carefully lift up the circuit board to reveal the battery's wire and connector.

6. Disconnect the original battery.

7. Use the pry tool to lift up the original battery. The original battery is held in place by an adhesive. After you remove the original battery you may need to add some more adhesive to hold your new battery in place. Double sided tap can do the trick.

8. Place the new Garmin Nuvi 200 battery from Batteryship.com into the battery compartment and connect the battery into the socket you removed the original from.

9. Replace the circuit board to its original position and screw back in.

10. Reposition the power button cover

11. Gently snap the device shut.

12. Screw the 2 screw back into the casing of the device.

13. Place the label back to its orginal postion to cover the 2 screws and charge the Nuvi for at least 4 hours.

PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

Garmin Nuvi 270 Battery Installation Instructions

Garmin Nuvi 270 Battery Installation Instructions

The following Garmin Nuvi 270 Battery Replacement Instruction guide can be used for the following models:

Garmin Nuvi 270 Battery

1. Garmin has hidden the first 2 screws underneath the Nuvi's label. Remove the lable to reveal the 2 screws.

2. Remove the two screws.

3. Using the pry tool sepearte the Garmin nuvi working your way around – this will release the power button cover – remove the button cover.

4. Remove the three screws securing the circuit board.

5. Carefully lift up the circuit board to reveal the battery's wire and connector.

6. Disconnect the original battery.

7. Use the pry tool to lift up the original battery. The original battery is held in place by an adhesive. After you remove the original battery you may need to add some more adhesive to hold your new battery in place. Double sided tap can do the trick.

8. Place the new Garmin Nuvi 270 battery from Batteryship.com into the battery compartment and connect the battery into the socket you removed the original from.

9. Replace the circuit board to its original position and screw back in.

10. Reposition the power button cover

11. Gently snap the device shut.

12. Screw the 2 screw back into the casing of the device.

13. Place the label back to its orginal postion to cover the 2 screws and charge the Nuvi for at least 4 hours.

PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

Garmin Nuvi 265WT Battery Installation Instructions

The following Garmin Nuvi 265WT Battery Replacement Instruction guide can be used for the following models:

Garmin Nuvi 265WT Battery

1. Garmin has hidden the first 2 screws underneath the Nuvi's label. Remove the lable to reveal the 2 screws.

2. Remove the two screws.

3. Using the pry tool sepearte the Garmin nuvi working your way around – this will release the power button cover – remove the button cover.

4. Remove the three screws securing the circuit board.

5. Carefully lift up the circuit board to reveal the battery's wire and connector.

6. Disconnect the original battery.

7. Use the pry tool to lift up the original battery. The original battery is held in place by an adhesive. After you remove the original battery you may need to add some more adhesive to hold your new battery in place. Double sided tap can do the trick.

8. Place the new Garmin Nuvi 265WT battery from Batteryship.com into the battery compartment and connect the battery into the socket you removed the original from.

9. Replace the circuit board to its original position and screw back in.

10. Reposition the power button cover

11. Gently snap the device shut.

12. Screw the 2 screw back into the casing of the device.

13. Place the label back to its orginal postion to cover the 2 screws and charge the Nuvi for at least 4 hours.

PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

Garmin Nuvi 265W Battery Installation Instructions

The following Garmin Nuvi 265W Battery Replacement Instruction guide can be used for the following models:

Garmin Nuvi 265W Battery

1. Garmin has hidden the first 2 screws underneath the Nuvi’s label. Remove the lable to reveal the 2 screws.

2. Remove the two screws.

3. Using the pry tool separate the Garmin nuvi working your way around – this will release the power button cover – remove the button cover.

4. Remove the three screws securing the circuit board.

5. Carefully lift up the circuit board to reveal the battery’s wire and connector.

6. Disconnect the original battery.

7. Use the pry tool to lift up the original battery. The original battery is held in place by an adhesive. After you remove the original battery you may need to add some more adhesive to hold your new battery in place. Double sided tap can do the trick.

8. Place the new Garmin Nuvi 265W battery from Batteryship.com into the battery compartment and connect the battery into the socket you removed the original from.

9. Replace the circuit board to its original position and screw back in.

10. Reposition the power button cover

11. Gently snap the device shut.

12. Screw the 2 screw back into the casing of the device.

13. Place the label back to its orginal postion to cover the 2 screws and charge the Nuvi for at least 4 hours.

PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

Garmin Nuvi 265T Battery Installation Instructions

The following Garmin Nuvi 265T Battery Replacement Instruction guide can be used for the following models:

Garmin Nuvi 265T Battery

1. Garmin has hidden the first 2 screws underneath the Nuvi's label. Remove the lable to reveal the 2 screws.

2. Remove the two screws.

3. Using the pry tool sepearte the Garmin nuvi working your way around – this will release the power button cover – remove the button cover.

4. Remove the three screws securing the circuit board.

5. Carefully lift up the circuit board to reveal the battery's wire and connector.

6. Disconnect the original battery.

7. Use the pry tool to lift up the original battery. The original battery is held in place by an adhesive. After you remove the original battery you may need to add some more adhesive to hold your new battery in place. Double sided tap can do the trick.

8. Place the new Garmin Nuvi 265T battery from Batteryship.com into the battery compartment and connect the battery into the socket you removed the original from.

9. Replace the circuit board to its original position and screw back in.

10. Reposition the power button cover

11. Gently snap the device shut.

12. Screw the 2 screw back into the casing of the device.

13. Place the label back to its orginal postion to cover the 2 screws and charge the Nuvi for at least 4 hours.

PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

Garmin Street Pilot c320 Battery Installation Instructions

The following Garmin StreetPilot c320 Battery Replacement Instruction guide can be used for the following models:

Garmin StreetPilot c320 Battery

1. Begin by prying off the front cover of your Garmin StreetPilot c320 to reveal 4 screws.

2. Remove the four screws.

3. Take apart the case to reveal the battery. Note the position of the battery and the wires. Disconnect the battery.

4. Remove the 2 screws securing the original battery. Disconnect the ribbon cable by prying up the plastic retainer.

5. Using a soldering iron detach the 4 wires connecting the battery to the Garmin and remove. Note where they are soldered as you will be soldering the wires from the new battery to the same location.

6. Insert a new Garmin StreetPilot c320 Battery from BatteryShip.com and secure the new battery using the 2 screws you removed in step #4.

7. Solder on the 4 wires to their appropriate places.

8. Plug in the connector and gently close the case.

9. Replace the 4 screws and snap on the front cover.

10 Charge your new Garmin StreetPilot c320 Battery for 4 hours.

PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

Garmin Street Pilot c340 Battery Installation Instructions

The following Garmin StreetPilot c340 Battery Replacement Instruction guide can be used for the following models:

Garmin StreetPilot c340 Battery

1. Begin by prying off the front cover of your Garmin StreetPilot c340 to reveal 4 screws.

2. Remove the four screws.

3. Take apart the case to reveal the battery. Note the position of the battery and the wires. Disconnect the battery.

4. Remove the 2 screws securing the original battery. Disconnect the ribbon cable by prying up the plastic retainer.

5. Using a soldering iron detach the 4 wires connecting the battery to the Garmin and remove. Note where they are soldered as you will be soldering the wires from the new battery to the same location.

6. Insert a new Garmin StreetPilot c340 Battery from BatteryShip.com and secure the new battery using the 2 screws you removed in step #4.

7. Solder on the 4 wires to their appropriate places.

8. Plug in the connector and gently close the case.

9. Replace the 4 screws and snap on the front cover.

10 Charge your new Garmin StreetPilot c340 Battery for 4 hours.

PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.